Products - High Speed

XC6207 GO Compatible HS LDO Voltage Regulator

GO Compatible HS LDO Voltage Regulator image

Specifications


Property XC6207
Type High Speed
Input Voltage 0.8 ~ 5.0V
Output Voltage
Accuracy ±2%
Maximum Output Current 300mA
Supply Current 0.1µA
Packages SOT-25, SOT89-5, USP-6C

Product Description


GO Compatible HS LDO Voltage Regulator

This product is not recommended for new designs, please use XC6217

  • XC6207A CE active high
  • XC6207B CE active high with CL discharge function

The XC6207 series are low noise, high speed, LDO regulators with a green operation (GO) function which automatically reduces quiescent current at low output loads down to a tiny 5.5μA (typ.). Performance features of the series includes fast ripple rejection (70dB @ 1kHz) and low dropout voltage (135mV @ 100mA). The series includes a voltage reference, error amplifier, current limiter, phase compensation circuit plus a driver transistor. Green operation (GO) automatically switches between a high speed mode (HS) and a power save mode (PS) depending upon the load current level. The switch point is fixed internally.

High-speed only operation can be enabled by providing a high level signal to the GO pin, this allows the user to select the most appropriate operating mode for the application.

By inputting a low signal to the CE pin, the IC will be put into an OFF state, with a stand-by current of 0.1uA. In this state with the XC6207B, a short will be created via the internal switch located between the VOUT and VSS pins and this enables the stored charge at the output capacitor (CL) to be discharged enabling the VOUT pin to quickly return to the VSS level.

The output stabilization capacitor (CL) is also compatible with low ESR ceramic capacitors. The constant current limit circuit and current limit's fold-back circuit also operate as a short circuit protection for the output current and the output pin.

Features :

  • Maximum Output Current: 300mA (500mA Max)
  • Dropout Voltage: 135mV@ 100mA
  • Operating Voltage Range: 2.0V ~ 6.0V
  • Output Voltage Setting Range: 0.8V ~ 5.0V (50mV increments)
  • Low Power Consumption: 5.5μA (typ.), PS mode 50μA (typ.), HS mode
  • Stand-by Current less than 0.1μA
  • Fast Ripple Rejection: 70dB @ 1kHz
  • Low ESR Capacitor - Ceramic capacitor compatible
  • Small Packages: SOT89-5, SOT-25, USP-6C




XC6207 Typical Application Circuit

XC6207 Supply Current vs Output Current