|Input Voltage||0.9 ~ 10V|
|Output Voltage||1.5 ~ 30V|
|Oscillation Frequency||100kHz, 300kHz|
PWM Step-Up DC/DC Controller
This part is not recommended for new designs, please use XC9120
The XC6367/68 series are multi-functional step-up DC/DC converter controllers with built-in high speed, low ON resistance drivers. Large output currents are possible using an externally connected transistor, coil, diode and capacitor. Output voltage is selectable in 100mV steps within a range of 1.5V ~ 6.5V (± 2.5%). For output voltages outside this range, we recommend FB version, which has a 1.0V internal reference voltage. Using the FB version, the required output voltage can be set-up using 2 external resistors. With a 300kHz oscillation frequency, the size of the external components can be reduced. Control switches from PWM to PFM during light loads with the XC6368 (PWM/PFM switchable) and the series is highly efficient from light loads to large output currents. Soft start time of XC6367/68A, B, and C series is internally set to 10msec and XC6367/68C, D, and F series regulate soft-start time by connecting resistors and capacitors externally. During stand-by (CE pin "Low"), supply current is reduced to less than 0.5μA.