Property | XC6802 |
---|---|
Type | 1 Cell Li-ion |
Operating Voltage | 4.25 ~ 6.0V |
Charge Termination Voltage | 4.2V ± 0.7% |
Trickle Charge Voltage | 2.9V |
Charge Current | 800mA |
Supply Current | 15µA |
Packages | SOT-89-5, SOT-25, USP-6C, USP-6EL |
Single Cell Li-ion Battery Charger IC
This product is not recommended for new designs, please use XC6804
The XC6802 series is a constant current/constant voltage single cell li-ion battery charger IC.
With an external resistor (RSEN) between the ISEN pin and the VSS pin, the charge current can be set anywhere up to a maximum of 800mA. This flexibility makes the XC6802 series the ideal choice for a wide variety of battery charge applications.
Operating voltage is between 4.25V ~ 6.0V and current consumption is only 15μA in standby (CE ON) and 10μA in shutdown (CE OFF).
The battery charge termination voltage is internally set to 4.2V ±0.7% and the trickle charge voltage and accuracy is 2.9V ±3%. In a typical application circuit, when the BAT pin voltage rises above 2.9V, the charger enters into constant-current mode (CC mode) and the battery is charged by the programmed current charge. When the BAT pin voltage reaches 4.2V, the charger enters constant-voltage mode (CV mode) automatically. After this, the charge current starts to drop and when it gets down to one tenth of the programmed charge current, the charge terminates. The charge status output pin, /CHG pin, is capable of checking the device’s charging state while connected to an external LED.