General Description
The XCM520 series is a multi chip module which comprises of a 600mA driver transistor built-in synchronous step?down DC/DC converter and a dual CMOS LDO regulator. The device is housed in small USP-12B01 package which is ideally suited for space conscious applications.
The XCM520 can replace this dual DC/DC to eliminate one inductor and reduce output noise.
The DC/DC converter with a built-in 0.42OP-channel MOS and a 0.52ON-channel MOS provides a high efficiency, stable power supply up to 600mA to using only a coil and two ceramic capacitors connected externally.
The highly accurate, low noise, dual CMOS LDO regulator includes a reference voltage source, error amplifiers, driver transistors, current limiters and phase compensation circuits internally. The series is also fully compatible with low ESR ceramic capacitors.
This high level of output stability is maintained even during frequent load fluctuations, due to the excellent transient response performance and high PSRR achieved across a broad range of frequencies. The EN function allows the output of each regulator to be turned off independently, resulting in greatly reduced power consumption.
Features
DC/DC Convertor Block - Driver Transistor :0.42O P-channel MOS Built-in
- Switching Transistor :0.52O N-channel MOS Built-in
- Input Voltage Range :2.7V ~ 6.0V
- Output Voltage: 2.3V(VOUT3)
- High Efficiency: 86%(TYP.)
- Output Current:600mA
- Oscillation Frequency: 3.0MHz (±15%)
- Soft-start:Built-In Soft-Start
- Current Limiter Circuit: Constant Current & Latching
- Control :Fixed PWM, Auto PWM/PFM
Dual LDO Regulator Block
- Maximum Output Current:150mA(Limiter 300mA TYP.)
- Dropout Voltage :100mV@100mA
- Operating Voltage Range : 1.5V~6.0V
- Output Voltages :0.8V(VOUT1),1.2V(VOUT2)
- High Accuracy :±2% (VOUT1),±30mV (VOUT2)
- Low Power Consumption:25?A (TYP.)
Applications
- Close-proximity wireless transfer Module
Typical Application Circuit

|